KDB-120ALU Automatic Blister Packing Machine (Alu-Alu)
Alu/Alu blister packing machine KDB-120ALU is specially designed for the ALU/ALU product for
the purpose of better preservation and prevention of light rays. KDB-120ALU has similar features
with KDB-120 except it's formed by cold extruding. It can also pack ALU/PVC's product.
FLOW CHART
KDB MACHINE
Sealing Line (cross-net type)
Cross-net type roller,due to crossed net sealing is capable of blocking 
the air completely and prolonging medicine preservation about 4 times over plate type sealing.
The cross-net type roller is composed of two rollers compressed in a single line with a very small contact area preventing hot air from getting into the blister pockets,so medicine effectiveness is unaffected.
The machine adopts a no waste cut method, so no wasted material is
produced. It can save
about 1/5 of material compared to traditional types.
TRADITIONAL MACHINE
Sealing Dot (plate type
Dot type (plate-type)
Plate type uses dot-type sealing:air gets into the medicine where there 
aren't dots and thus
shortens expiration.
Since the sealing area is larger and sealing time
longer, during the sealing process, hot air easily
gets into the blister pockets. This decreases the
effectiveness of the medicine.
Plate-type of triming wastes about 3-5 mm of material between two blister and increases cost at the same time.
FEATURES:
1. |
Compact size with all function and fast production. |
2. |
Compressed air forming creates equivalent blister pocket. |
3. |
Continuous motion offers best filling condition. |
4. |
Equipped with trouble detection system which displays where the trouble is. |
5. |
The machine adopts a no waste trimming method to save material. |
6. |
It is very easy to exchange all the size change parts. It takes less than 30 minutes to finish. |
7. |
Main frame is covered with stainless steel. This makes it easier to clean and meets cG.M.P. standard. |
8. |
It is neither noise nor creates public hazards and it is easy to operate. |
9. |
The expiration is about 4 times longer than traditional dot-type sealing. |
TECHNICAL DATA
| Output | Max. 100 blisters/min | |
| Forming film thinkness | 0.25~0.4 mm(PVC) | |
| Film/foil width | Max. 140mm | |
| Forming depth | Max. 8mm | |
| Formed area available | Max. 146 x125mm | |
| Reel diameter PVC film | Max.Ø500mm | |
| Reel diameter ALU foil | Max.Ø320mm | |
| Reel core | Ø70~Ø76mm | |
| Power supply | 220V/380V/415V 50Hz/60Hz, 3 phase |
|
| Power consumption | 6~7 KW | |
| Compressed air consumption | 6 KG/CM2(bar), 150L/min | |
| Cooling water consumption | 27~31L/HR, 15°C~20°C | |
| Forming materials | ALU/ALU,PVC/ACLAR,PET PVC,PP,PVC/PVDC |
|
| Foil materials | ALU/HARD,ALU/SOFT ALU/PAPER,ALU/POLYESTER,PP |
|
PACKING DATA
Machine dimension (LxWxH) |
260 x 105 x 190 (cm) |
| Packing size | 285 x 135 x 205 (cm) |
| Net Weight | 1000 kgs |
| Gross Weight | 1400 kgs |