GHL HIGH SPEED MIXING GRANULATOR
General applications
GHL high speed mixing granulator is a high efficiency equipment that can mix different powder materials and granulate granule in one procedure. It is widely used for pharmaceutical industry, foodstuff industry and chemical industry, etc.
Features of equipment
- The machine adopts horizontal barrel(cone) structure. Its structure is reasonable.
- The inner surface of equipment has no dead corner. It works at sealed state and conforms to the requirements of GMP.
- Short granulating time, high efficiency and energy saving
- The character of granule is uniform and the fluidization of granule is good. It provides ideal granule material to tablet pressing procedure.
- Compared with traditional process, it can reduce 25% of binder and shorten drying time too.
- Each batch needs 2 minutes to dry mixing and 1-4 minutes to granulating. Compared with traditional process, its efficiency can raise 4-5 times.
- Whole operation has strict safe protective measures.
It can mix uniformly even when the gravity difference between main material and excipient is very big, without the phenomenon of delamination.
Typical customers
- Russia Kolorit Group
- Beijing Yajin Pharma co., Ltd
- Fujian Sanai Pharma co., Ltd
- Guangdong Guangzhou city Huacheng Pharma co., Ltd
- Guangdong Hongshanhu Pharma co., Ltd
- Hebei Shjjiazhuang Lerentang Pharma co., Ltd
- Heilongjiang Wandashan Mild co., Ltd
- Jilin Tonghua city Wantong Pharma co., Ltd
- Jiangsu Dongshen Science Qidong Gaitianli co., Ltd
Technical parameter
| Item Specification |
10 |
50 |
150 |
200 |
|||||
Container Volume |
L |
10 |
50 |
150 |
200 |
||||
Capacity |
kg/batch |
3 |
15 |
50 |
60 |
||||
Mixing speed |
r.p.m |
300/600 |
200/400 |
180/270 |
180/270 |
||||
Mixing power |
kw |
1.2/2.2 |
4/5.5 |
6.5/8 |
9/11 |
||||
Cutting speed |
r.p.m |
1500/3000 |
|||||||
Cutting power |
kw |
0.85/1.1 |
1.3/1.8 |
2.4/3 |
4.5/5.5 |
||||
Installation size |
B(mm) |
750 |
950 |
1000 |
1100 |
||||
C×D(mm) |
1000×650 |
1250×800 |
1350×800 |
1650×850 |
|||||
E(mm) |
745 |
970 |
1050 |
1450 |
|||||
F(mm) |
1350 |
1650 |
1750 |
2050 |
|||||
All datas are used for reference only. According to the condition of material, our factory has the right change but not notice, pardon



