FZG,YZG VACUUM DRYER
General applications
- Under the condition of vacuum, the boiling point of material
solution will reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator. - The heat source for evaporating operation may be low pressure steam or waster heat steam (If having special requirement, customer may choose water or oil to heat. Our factory can design specially for you).
- Heat loss of evaporator may be reduced.
- Suitable for drying thermal sensitive material that is easy to decompose, polymerize or denature.
- Before drying, it can carry out disinfections. During the period of drying, any impurity can't be mixed into it.
- It is static vacuum dryer, the form and structure of material to be dried can't be damaged.
Typical customers
- Guangxi Hefen Pharma co., Ltd
- Hebei medical university
- Suzhou Changzheng Pharma co., Ltd
- Jilin Xiuzheng Pharma co., Ltd
- Shandong Lukang Pharma co., Ltd
- Yunnan Guangfu Pharma co., Ltd
Technical parameters
| Specification Item |
YZG-600 |
YZG-1000 |
Internal size of drying chamber(mm) |
Ø600×976 |
Ø1000×1527 |
Outer size of drying chamber(mm) |
1135×810×1020 |
1693×1190×1500 |
Layer amount of tray frame |
4 |
6 |
Distance between layers |
81 |
102 |
size of tray |
310×600 ×45 |
460×640×45 |
Qty of tray |
4 |
12 |
pressure used in pipe of tray |
≤0.784(8kg/cm2) |
<0.784 |
T of tray frame to be used(deg C) |
35-150 |
35-150 |
vacuum in unload in chamber(Mpa) |
≤0.098(1kg/cm3) |
≤0.098 |
When use condensator, |
2X-15A 2kw |
2X-30A 3kw |
When not use condensator, |
SK-0.8 2.2kw |
SK-3 5.5kw |
weight of drying chamber(kg) |
250 |
800 |